As a new member and new owner of the Lone Gull junk schooner 'Ivory Gull' I'd be grateful with some help over the dimensions of the class. Firstly I'd like to know the displacement of the vessel as I have conflicting figures. Secondly I'd like to know the sail area of the original sail plan for comparison with the current rig. Any help would be much appreciated.
Regards,
Gerry.
Lone Gull II dimensions
Moderators: Eventide Owners Group, Piskie, chris s
Lone Gull II dimensions
The trackless wastes don't know you.
- Fiddler's Green
- Posts: 184
- Joined: Wed March 1st, 2006, 12:58 pm
- Location: Essex
- Contact:
Lone gull II sail area
I have looked up an old leaflet and found the following.
Mainsail 248 sq ft
No 1 Jib 150 sq ft
This is standard bermudan rig of course, and without a bowsprit. not sure as this design needed one as the write up says she was light on the helm, two fingers up to F5, a firm hand above that.
hope this helps.
Regards,
John
Mainsail 248 sq ft
No 1 Jib 150 sq ft
This is standard bermudan rig of course, and without a bowsprit. not sure as this design needed one as the write up says she was light on the helm, two fingers up to F5, a firm hand above that.
hope this helps.
Regards,
John
Proud owner and builder of 'Fiddler's Green'
- Fiddler's Green
- Posts: 184
- Joined: Wed March 1st, 2006, 12:58 pm
- Location: Essex
- Contact:
Re: Lone Gull II dimensions
Just to say the Forum is back up wonering how you are getting on!
Regards,
John
Regards,
John
Proud owner and builder of 'Fiddler's Green'